Related Manuals for Linksys SR224G
Summary of Contents for Linksys SR224G
- Page 1 24-Port 10/100 + 2-Port Gigabit Switch + 2 miniGBIC Use this guide to install: SR224Gv1.2 User Guide...
- Page 2 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other coun- tries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and prod- uct names are trademarks or registered trademarks of their respective holders.
-
Page 3: Table Of Contents
No matter how intensive your network demands, the Linksys 24-Port 10/100 + 2-Port Gigabit Switch + 2 miniGBIC has speed, flexibility, and reliability that you can count on. -
Page 4: Chapter 2: Getting To Know The 24-Port 10/100 + 2-Port Gigabit Switch + 2 Minigbic
Switch + 2 miniGBIC Front Panel LEDs and Ports Figure 2-1 The LEDs and network ports are located on the front panel of the Switch. All network ports are independent, so you can use all of them simultaneously. LEDS System Green. -
Page 5: Chapter 3: Connecting The 24-Port 10/100 + 2-Port Gigabit Switch + 2 Minigbic
4. Repeat steps 2 and 3 to connect additional devices. 5. If you are using a Gigabit port, connect a Category 5e Ethernet network cable to a Gigabit port on the Switch, and connect the other end to a Gigabit server or other network device. -
Page 6: Placement Options
1000Base-T are the same as those used for 100BaseT. Category 5 link lengths are limited to 100 meters by the ANSI/TIA/EIA-568-A cabling standard. Auto MDI/MDI-X - On a network hub or switch, an auto MDI/MDI-X port automatically senses if it needs to act as a MDI or MDI-X port. The auto- MDI/MDI-X capability eliminates the need for crossover cables. -
Page 7: Appendix B: Specifications
MDI (Medium Dependent Interface) - On a network hub or switch, a MDI port, also known as an uplink port, connects to another hub or switch using a straight- through cable. To connect a MDI port to a computer, use a crossover cable. -
Page 8: Appendix C: Warranty Information
This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident. - Page 9 EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recy- cling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:...
-
Page 12: Appendix D: Contact Information
Can't find information about a product you want to buy on the web? Do you want to know more about networking with Linksys products? Give our advice line a call at: Or fax your request in to: If you experience problems... - Page 13 © Copyright 2006 Cisco Systems, Inc. All Rights Reserved.