Gigabyte 6OXET Series User Manual page 115

Or else you can select flash BIOS in DOS mode.
Please check your BIOS vendor (AMI or AWARD) , your motherboard name and PCB
version on the motherboard.
Format a bootable system floppy diskette by the command " format a:/s " in command
1.
mode.
2. Visit the Gigabyte website at http://
need and download it to your bootable floppy diskette.
3. Insert the bootable diskette containing the BIOS file into the floppy diskette driver.
4. Assuming that the floppy diskette driver is A, reboot the system by using the A: driver.
At the A: > prompt, run the BIOS upgraded file by executing the Flash BIOS utility and
the BIOS file with its appropriate extension.
Example: (AMI tool)
Example: (Award tool)
5. Upon pressing the <Enter> key, a flash memory writer menu will appear on screen.
Enter the new BIOS file name with its extension filename into the text box after file
name to program.
6. If you want to save the old BIOS file(perform as soon as system is operational, this is
recommended), select Y to DO YOU WANT TO SAVE BIOS , then type the old BIOS
filename and the extension after filename to save: This option allows you to copy the
contents of the flash memory chip onto a diskette, giving you a backup copy of the
original motherboard BIOS in case you need to re-install it. Select N to DO YOU WANT
TO SAVE BIOS , if you don't want to save the old BIOS file.
After the decision to save the old BIOS file or not is made, select Y to ARE YOU SURE
7.
TO PROGRAM when the next menu appear; wait until a message showing Power Off
or Reset the system appears. Then turn off your system.
8. Remove the diskette and restart your system.
9. Hold down <Delete> key to enter BIOS setup. You must select "Load Setup BIOS
Default" to activate the new BIOS, then you may set other item from the main menu.
www.gigabyte.com.tw
(Where 6OXET.f1 is name of the BIOS file name)
A:>flashxxx.exe 6OXET.f1
(Where 6OXET.f1 is name of the BIOS file name)
A:>Awdflash.exe 6OXET.f1
108
Appendix
,Select the BIOS file you