Mains Plug Replacement - Black & Decker FC300 User Manual

Mains plug replacement

If a new mains plug needs to be fitted:
•
Safely dispose of the old plug
•
Connect the brown lead to the live terminal of
the new plug
•
Connect the blue lead to the neutral terminal
•
If the product is class I (earthed), connect the
green/yellow lead to the earth terminal
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal
•
Follow the fitting instructions supplied with
good quality plugs
•
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product
Assembly
The appliance should be
disconnected from the mains supply
before assembly.
1. Wash all detachable parts (see chapter
'Maintenance and cleaning').
Extra care should be taken when
handling or assembling the blades.
2. Slide the secondary blade onto the drive
blade.
3. Gently twist the secondary blade into place.
4. Place the assembled blade into the jug,
ensure it is placed on to the spindle in the
bottom of the jug.
5. Place the jug lid on to the jug. Ensure that
the spindle of the drive blade sticks out
through the hole in the top of the jug lid.
ENGLISH
5