Lenovo 3000 Y310 User Manual page 57

Lenovo 3000Y310 UG.book Page 49 Friday, September 14, 2007 4:24 PM
If you want to replace a new SO-DIMM, remove the origin SO-DIMM by
releasing the two latches on both edges of the socket at the same time, pull
out the SO-DIMM from the socket, and then install the new SO-DIMM
follow the steps above.
Attention: If only one SO-DIMM is installed, plug it into the SO-DIMM
To make sure that the SO-DIMM is installed correctly, do as follows:
1. Turn the computer on.
2. While the initial screen is displayed, press F2. The BIOS Utility screen
socket which is closer to the mainboard.
opens. The Total Memory item on the Main menu shows the amount of
memory you can utilize.
Replacing Memory
Chapter 5. Upgrading and Replacing Devices
49