Lenovo 3000 Y310 User Manual page 20

Lenovo 3000Y310 UG.book Page 12 Friday, September 14, 2007 4:24 PM
Getting Started
k EQ button
There are five modes of EQ. Press this button to switch between these
modes.
(1) None: Set the system output sound to the default setting.
(2) Rock: Set the system output sound to rock music mode.
(3) Pop: Set the system output sound to pop music mode.
(4) Dance: Set the system output sound to dancing mode.
(5) Class: Set the system output sound to classical mode.
l Instant buttons
Mute button
Press this button to turn on or off the sound.
Custom button
With the preinstalled software, once you press the button, a dialog
window appers to allow you to define the button with the applications
listed, so that you can recall the application instantly by pressing this
custom button.
Note: You need to install the driver of EnergyCut to realize this
Novo button
This button functions as a reset button; use with caution. Press the
Novo button to enter the main interface of OneKey Recovery while the
power is off. You can use OneKey Recovery to restore the primary
hard disk partition (usually drive C) back to the factory default
configuration, including the operating system and the software on it.
Attention:
For details, see "OneKey Recovery4.65 User Guide".
When your computer is running Windows Vista™, and if you have the
EnergyCut program installed, you can shift the power schemes by
pressing the Novo button.
Note: If your computer is in hibernation, you may not enter the
12
Lenovo 3000 Y310 User Guide
function. See page 29.
Once Easycapture is installed, this button is customized with
Easycapture automatically.
Once done, the system can no longer return to its
previous state. All data on the primary hard disk
partition (usually drive C) will subsequently be lost. So
make sure all important files on the primary hard disk
partition have been backed up onto another hard disk or
USB hard disk drive before this operation.
OneKey Recovery by pressing the Novo button. Press the
Power button to enter the operation system, shut down your
computer first to use the Novo button.