Eeprom - Kyocera FS-C1020MFP Service Manual

Replacement and Adjustment
3. Speaker [A] ( x 2,

EEPROM

Replacement and Reinstallation procedures for the EEPROM are included in the
"EGB (Engine Board)" replacement procedure. Refer to "EGB (Engine Board)" for
details.
When replacing an old EEPROM with a new EEPROM, EEPROM setting is required. Follow
the EEPROM setting procedure described below.
Replacement Procedure
Do the following steps 1 to 9 with the front cover of the machine open. After
completing these steps, turn off the machine.
1. Open the front cover and turn on the machine.
The machine may issue an error code (because the cover is open), but
continue this procedure.
2. Enter the following keys consecutively in order to enter "Engine Maintenance" in the
"Maintenance Mode Menu".
3. Select "Init Engine EEPROM" item and execute it to initialize the EEPROM.
4. Press the "Clear/Stop" key to exit the "Engine Maintenance" menu.
5. Select the "Serial No." item, and then input a serial number.
Ask your supervisor about how to access the serial number input display.
x 1)
69