Installation; Installation Requirements; Environment; Machine Level - Kyocera FS-C1020MFP Service Manual

Installation

Installation

Installation Requirements

Environment

1. Temperature Range: 10°C to 32°C (50°F to 89.6°F)
2. Humidity Range: 15% to 80% RH
3. Ambient Illumination: Less than 2,000 lux (do not expose to direct sunlight)
4. Ventilation: 3 times/hr/person
5. Do not put the machine in areas that get sudden temperature changes. This includes:
Areas directly exposed to cool air from an air conditioner
Areas directly exposed to heat from a heater.
6. Do not put the machine in areas that get exposed to corrosive gas.
7. Do not install the machine at locations over 2,500 m (8,125 ft.) above sea level.
8. Put the machine on a strong, level base. (Inclination on any side must be no more than
5 mm.)
9. Do not put the machine in areas with strong vibrations.

Machine level

Front to back: Within 5 mm (0.2") of level
Right to left: Within 5 mm (0.2") of level
11