Listening To Bluetooth Enabled Devices - Sharp XL-HF102B Operation Manual

Listening to Bluetooth enabled devices

■ Bluetooth
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even
●
when there is a Bluetooth connection made to a mobile
phone.
Please refer to the operating manual supplied with the
●
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before
they can exchange data. This unit can memorize up to a
maximum of 99 devices. Once paired, it is not necessary to
pair them again unless:
pairing is made with more than 99 devices. Pairing can
●
only be made one device at a time. If subsequent de-
vice is paired, the oldest device paired will be deleted
and replaced with the new one.
this unit is reset. All pairing information is deleted when
●
unit is reset.
pairing information is deleted while re-pairing, etc.
●
Indicators:
Indicator Condition
Blinks
Lights up
No indication
However, the indication status is not displayed during
Bluetooth standby mode.
Bluetooth status
In waiting or pairing mode
Connected
Unconnected
■ Pairing with other Bluetooth source devices
1
Press the ON/STANDBY button to turn the power on.
2
Press the FUNCTION button (main unit) repeatedly
to select Bluetooth function. "Bluetooth" appears on
the display.
3
Press and hold the PAIRING button for 3 seconds or
more. "Start Pairing" appears on the display. The unit
is now in pairing mode and is ready to be paired with
other Bluetooth source device.
4
Perform pairing procedure on the source device to
detect this unit. "XL-HF102B SHARP" will appear in
the detected devices list (if available) in the source
device. (Refer the source device operating manual for
details).
Notes:
Place the devices to be paired within 3 feet (1 me-
●
ter) of each other when pairing.
Some source devices are unable to display lists of
●
detected devices. To pair this unit with the source
device, refer to the source device operating man-
ual for details.
5
Select "XL-HF102B SHARP" from the source list. If
Passcode* is required, enter "0000".
Passcode may be called PIN Code, Passkey, PIN
*
number or Password.
6
"Connected" appears on the display once the unit is
successfully paired with the source device. (Pairing
information is now memorized in the unit.) Some au-
dio source devices may connect with the unit auto-
matically after pairing is completed, otherwise follow
the instructions in the source device operating manual
to start connection.
7
Press the play button on main unit, remote control or
source device to start Bluetooth streaming playback.
Notes:
If a device such as microwave oven, wireless LAN
●
card, Bluetooth device or any other device that uses
the same 2.4 GHz frequency is placed near the system
some sound interruption may be heard.
The transmission distance of the wireless signal be-
●
tween the device and the main unit is about 10 m (32 '),
but may vary depending on your operating environment.
If a steel concrete or metallic wall is between the device
and the main unit, the system may not operate at all,
because the wireless signal cannot penetrate metal.
E-8