Samsung SNB-1001 User Manual page 23

2. Push the release lock out while turning the main unit in
the <unLocK> direction to remove the bracket.
If this doesn't work, use the hole on the bottom of the
bracket to turn the bracket in the <LocK> direction.
3. Use the provided screws (x3) to fix the bracket to a desired position (ceiling or wall).
Ensure that the <FRONT> label on the bracket faces the direction for camera monitoring.
`
4. Arrange the cables through the bracket to
the ceiling or wall.
If you intend to drill a hole in the installation
site for the wiring purpose, remove the wiring
cover by force to reveal a hole. Arrange the
cables through the hole. If you intend to
arrange the cables without drilling a hole, use
the empty area opposite to the <front>
label side for the wiring purpose.
5. Mount the main unit onto the bracket.
Align the marking hole of the main unit with
the <front> label of the bracket, and turn
the unit in the <LocK> direction.
6. Adjust the lens in a desired direction.
For adjusting the lens direction, refer to "adjusting the monitoring direction for the
camera". (page 25)
7. Fix the cover to the main unit.
Fit the protruding part inside the cover into the corresponding hole of the main unit,
and turn the cover to fix it.
Wiring Cover
English _23