Samsung SNB-1001 User Manual page 18

overview
components
Item
Reset Button
a
Micro SD Memory
b
Card Compartment
Monitor Out
c
Focus lever
d
18_ overview
Resets the camera settings to the default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that
J
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Compartment for the Micro SD memory card.
Using the test monitor cable, you can connect to a mobile display for camera
test. (for installation)
Turn the barrel left or right to adjust the focus, and turn the knob clockwise
to lock the focus.
Description