The Applications And Gaming Tab - Port Range Forward; Figure 5-36: Applications And Gaming Tab - Port Range Forward - Linksys WRH54G User Manual

Wireless-G Home Router
IP Address. Enter the IP Address of the PC running the application.
Enable. Click the Enable checkbox to enable port forwarding for the application.
Check all the values and click Save Settings to save your settings. Click the Cancel Changes button to cancel your
unsaved changes.

The Applications and Gaming Tab - Port Range Forward

The Applications and Gaming Tab allows you to set up public services on your network, such as web servers, ftp
servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any
applications that use Internet access to perform functions such as videoconferencing or online gaming. Some
Internet applications may not require any forwarding.)
To forward a port, enter the information on each line for the criteria required. The criteria are described here.
Application. In this field, enter the name you wish to give the application. Each name can be up to 12 characters.
Start/End. This is the port range. Enter the number that starts the port range under Start and the number that
ends the range under End.
Protocol. Enter the protocol used for this application, either TCP or UDP, or Both.
IP Address. For each application, enter the IP Address of the PC running the specific application.
Enable. Click the Enable checkbox to enable port forwarding for the relevant application.
When you finish making changes to this screen, click the Save Settings button to save the changes, or click the
Cancel Changes button to undo your changes. Help information is shown on the right-hand side of the screen.
For additional help, click More.
Figure 5-36: Applications and Gaming Tab - Port Range
Forward
Chapter 5: Configuring the Wireless-G Home Router 34
The Applications and Gaming Tab - Port Range Forward