Linksys WRH54G Quick Installation

Start Here

for Setup and Connection
For advanced configuration, refer to the User Guide
on the CD-ROM.
Package Contents
• Use this guide for first time
setup of your Router.
• Wireless-G Home Router
• Setup CD-ROM
• Setup Wizard requires a PC
• User Guide on CD-ROM
with Microsoft Windows 98SE, • Power Adapter
• Ethernet Network Cable
Me, 2000, XP or Vista and a
• Quick Installation Guide
broadband Internet connec-
tion.
Wireless-G
Home Router
Wireless Quick Installation
Model No. Model No. WRH54G
There are two ways to set up and configure the Router. Choose one :
•
Set up the Router with the Setup Wizard from the Web Utility, Step 1.
OR
•
Run the Setup Wizard from the CD-ROM, Step 2.
1
Web Setup Wizard
A
Power down your network devices.
B
Locate an optimum location for the Router. The best place for the
Router is usually high up and at the center of your wireless network.
Adjust the antenna so it is straight up in the air.
C
Connect a standard Ethernet network cable to the Router's Internet
port. Then, connect the other end of the Ethernet cable to your cable
or DSL broadband modem.
D
Connect your network PCs or Ethernet devices to the Router's num-
bered ports using standard Ethernet network cabling.
IMPORTANT: Make sure you use the power adapter that is supplied
with the Router. Use of a different power adapter could damage the
Router.
E
Connect the AC power adapter to the Router's Power port and the
other end into an electrical outlet. Only use the power adapter sup-
plied with the Router. Use of a different adapter may result in product
damage.
F
Open your web browser and enter the Router's default IP address,
http://192.168.1.1, in the Address field. Then press Enter.
G
The Utility's Welcome screen will appear. Click the Setup Wizard but-
ton to run the Setup Wizard and follow the on-screen instructions.
Note: If the screen doesn't appear, refer to Windows Help to see if your
PC's TCP-IP is set up with Obtain an IP address automatically.
2
CD-ROM Setup Wizard
A
Insert the Setup CD into your CD-ROM drive.
B
This Welcome screen will appear on your monitor.
Click the Click Here to Start button.