Viewing System Information; Video And Audio - Dynex DX-16E220NA16 User Manual

Dynex 16" LED TV
4 Press or to select Yes (to reset all settings to
factory default), or No (to not reset). If you select Yes,
your TV turns off, then turns on again. The Setup
Wizard opens.
5 Go through the Setup Wizard. For more information,
see "Turning on your TV for the first
page 34.

Viewing system information

You may need to view system information during
troubleshooting.
1 Press MENU.
2 Press or to highlight Settings, then press
ENTER.
3 Press or to highlight System Info, then press
ENTER. Information about the TV software version is
displayed.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.

Video and audio

Problem
Picture does not
fill the screen.
time" on
There are black
bars around the
picture.
No picture (screen
is not lit) and no
sound.
or
Picture quality is
good on some
channels and poor
on others. Sound
is good.
www.dynexproducts.com
DX-16E220NA16
Solution
• Change the aspect ratio. An
increasing amount of digital TV
and movies are presented in
wide screen (16:9). See
"Adjusting the TV picture" on
page 42.
• Press (power) on the TV or
the remote control.
• Make sure that the video cables
are connected securely to the
side or back of your TV.
• Adjust the contrast and
brightness. See "Adjusting the
TV picture" on page 42.
• Make sure that the power
adapter is correctly connected
to your TV and a power outlet.
• Make sure that the correct
video input source is selected.
See "Selecting the video input
source" on page 35.
• Try another channel. The station
may be experiencing problems.
• Make sure that the incoming
signal is compatible.
• Make sure that the antenna or
cable TV is connected correctly
and securely. See "Connecting a
cable or satellite box" on
page 15 or "Connecting an
antenna or cable TV (no
on page 19.
• Check the closed caption
settings. Some TEXT modes can
block the screen.
• The problem may be caused by
a poor or weak signal from the
broadcaster or cable TV
provider.
• If you connect to cable or
satellite TV without a set-top
box and experience poor
picture quality, you may need
to install a set-top box to
improve signal reception and
picture quality. Contact your
cable or satellite TV provider
about upgrading to a set-top
box.
57
box)"