Table of Contents
Advertisement
Dynex 40" LED TV
Troubleshooting
Warning
Do not try to repair your TV yourself.
Contact authorized service personnel.
Restoring settings to default
Caution
When you restore default settings, all the
settings you have customized are reset.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight Settings, then press . The
Settings menu opens.
3 Press
or
to highlight Reset to Default, then
press ENTER. A confirmation box opens.
4 Press
or
to select Yes (to reset all settings to
factory default), or No (to not reset). If you select Yes,
your TV turns off, then turns on again. The SETUP
Wizard opens.
5 Go through the TV SETUP wizard. For more
information, see
"Turning on your TV for the first
time" on page 34.
Viewing system information
You may need to view system information during
troubleshooting.
1 Press MENU. The on-screen menu opens.
2 Press
ENTER. The Settings menu opens.
3 Press
ENTER. Information about the TV software version is
displayed.
4 Press MENU to return to the previous menu, or press
EXIT to close the menu.
www.dynexproducts.com
DX-40D510NA15
or
to highlight Settings, then press
or
to highlight System Info, then press
59
or
- Quick Links:
- Remote Control
Hide quick links:
Advertisement
Table of Contents
