CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. As you enjoy your television, please note that all televisions - new and old- must be supported on proper stands or installed according to the manufacturer's recommendations.
DX-16E220NA16 Important Safety Instructions 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects CAUTION have fallen into the apparatus, the apparatus has...
DX-16E220NA16 Handling the LCD panel Outdoor antenna grounding • Your TV’s screen is made of glass. Do not drop your TV or If an outside antenna or cable system is connected to hit, jolt, or press hard against the LCD panel. If the screen your TV, make sure that the antenna or cable system is breaks, be careful of broken glass.
Page 8
DX-16E220NA16 End of life directives Non-active pixels Your TV may contain materials that are regulated for The LCD panel contains almost 3 million thin film environmental reasons. Your TV also contains materials transistors, which provide exceptionally sharp video that can be recycled and reused. To help protect the quality.
Dynex 16" LED TV Introduction Congratulations on your purchase of a high-quality Dynex product. Your DX-16E220NA16 represents the state of the art in LED TV design and is designed for reliable and trouble-free performance. Installing the stand or wall mount bracket Notes •...
Page 10
DX-16E220NA16 Dynex 16" LED TV 2 Find the front of the stand, then hook the tab on the stand column through the slot on your TV. 3 Push the TV stand into the stand column, then twist the stand to the right side until it snaps into place.
Dynex 16" LED TV DX-16E220NA16 Installing the wall-mount bracket Warning This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 61.) 1 Carefully place your TV face-down on a soft surface to protect the screen from damages and scratches.
Page 12
DX-16E220NA16 Dynex 16" LED TV 3 Remove the stand column. 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV.
Dynex 16" LED TV DX-16E220NA16 Removing the TV stand from the stand column If you attached the TV stand to the stand column and want to wall-mount your TV, you do not need to remove the TV stand from the stand column. You just need to remove the stand column.
DX-16E220NA16 Dynex 16" LED TV TV components Buttons Note Your TV has built-in controls for adjusting basics settings The buttons are on the top of your TV. and several sets of jacks for connecting devices to your TV. Package contents •...
Dynex 16" LED TV DX-16E220NA16 Side jacks Item Description Connect headphones, an analog audio amplifier, a home theater system, or a sound bar to this jack. (audio out) For more information, see “Analog audio” on page 30. Connect a USB flash drive to this jack to view compatible JPEG picture files.
DX-16E220NA16 Dynex 16" LED TV Back Item Description Plug the AC power adapter into this DC IN (12V) connector. Connect the audio for a component video device to these jacks. For more information, see “Component video (better)” on page 16, 21, or 24.
Dynex 16" LED TV DX-16E220NA16 Remote control Button Press to... Turn closed captioning on or off. You can select CC On, CC Off, or CC On When Mute. See “Turning closed captioning on or off” on page 50. Change how the picture looks on the screen (aspect ASPECT ratio).
DX-16E220NA16 Dynex 16" LED TV What connection should I use? Connection type and Cable connector jack Your TV has several connection types for connecting devices to your TV. For the best video quality, you should connect a device Coaxial digital to the best available connection.
Dynex 16" LED TV DX-16E220NA16 Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I...
DX-16E220NA16 Dynex 16" LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box On your TV Audio cable Component Audio cable video cable connectors connectors Component video cable Component Analog video jacks...
Dynex 16" LED TV DX-16E220NA16 AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. Cable or satellite box On your TV...
DX-16E220NA16 Dynex 16" LED TV Coaxial (good) On your TV Cable or satellite box Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off.
Dynex 16" LED TV DX-16E220NA16 Connecting an antenna or cable TV (no box) On your TV Antenna or cable TV (no box) Coaxial cable connector Coaxial cable ANT/CABLE IN jack Back of TV 1 Make sure that your TV’s AC power adapter is unplugged and all connected devices are turned off.
DX-16E220NA16 Dynex 16" LED TV Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?”...
Dynex 16" LED TV DX-16E220NA16 Component video (better) Note Cables are often color-coded to match color-coded jacks. DVD or Blu-ray player On your TV Audio cable Component Audio cable video cable connectors connectors Component video cable Component Analog video jacks...
DX-16E220NA16 Dynex 16" LED TV Composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO/Y jack. DVD or Blu-ray player On your TV...
Dynex 16" LED TV DX-16E220NA16 Connecting a game console HDMI (best) Side of TV On your TV Game console HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s AC power adapter is unplugged and the game console is turned off.
DX-16E220NA16 Dynex 16" LED TV Component video (better) Notes • Your game console may require a special component video cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
Dynex 16" LED TV DX-16E220NA16 AV (composite video) (good) Notes • Most game consoles come with a special AV (composite video) cable. See the documentation that came with your game console or check the manufacturer’s Web site. • Cables are often color-coded to match color-coded jacks.
DX-16E220NA16 Dynex 16" LED TV Connecting a computer HDMI Side of TV On your TV HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s AC power adapter is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the computer.
Dynex 16" LED TV DX-16E220NA16 Connecting a USB flash drive Side of TV USB flash drive Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive. You may lose data or damage the USB flash drive.
DX-16E220NA16 Dynex 16" LED TV Connecting headphones When you connect headphones, audio plays through the headphones and the TV speakers are muted. See “Adjusting sound settings” on page 44. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.
Dynex 16" LED TV DX-16E220NA16 Connecting external speakers or a sound bar Digital audio Side of TV On your TV Digital speaker system Digital coaxial audio cable Digital coaxial audio cable connector Sound bar Digital coaxial audio jack 1 Make sure that your TV’s AC power adapter is unplugged and the digital speaker system or sound bar is turned off.
DX-16E220NA16 Dynex 16" LED TV Analog audio Side of TV Analog speaker system On your TV Audio cable Sound bar Audio cable connector (audio out) jack 1 Make sure that your TV’s AC power adapter is unplugged and the analog speaker system or sound bar is turned off.
Dynex 16" LED TV DX-16E220NA16 Connecting a home theater system with multiple devices Blu-ray player or Cable or satellite TV box DVD player AV receiver Game console USB flash drive Antenna or cable TV connected directly to Computer the wall jack The connections you make depend on the video and audio jacks available on your devices.
DX-16E220NA16 Dynex 16" LED TV Connecting power 1 Plug the power adapter into the DC IN (12V) jack on the back of your TV. 2 Plug the other end into an AC power outlet. Notes • Your TV should only be operated from the power source indicated on the label.
Dynex 16" LED TV DX-16E220NA16 Using the remote control 3 Replace the battery compartment cover. Cautions • Batteries should not be exposed to Installing remote control batteries excessive heat, such as sunshine, heat 1 While pressing the release latch on the back of the registers, or fire.
DX-16E220NA16 Dynex 16" LED TV Turning on your TV for the first 5 Press to highlight Time Zone, then press to select your time zone. You can select Eastern, Central, Mountain, Pacific, Alaska, Hawaii, time Newfoundland, or Atlantic. 6 Press...
Dynex 16" LED TV DX-16E220NA16 Understanding the basics A If you are using an antenna for a standard or HD TV signal, select Antenna. Your TV scans for available channels. The scan may take several minutes. During scanning your TV searches for Turning your TV on or off digital channels first.
DX-16E220NA16 Dynex 16" LED TV Using the on-screen menus Channels menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. The following menus are shown in TV mode. • Menu items that are not selectable are grayed out.
Dynex 16" LED TV DX-16E220NA16 Using a USB flash drive Selecting a channel • Press CH+ or CH– to go to the next or previous channel on the memorized channel list. You can connect a USB flash drive to your TV to view •...
Page 42
DX-16E220NA16 Dynex 16" LED TV 2 Press to access the menu. Photos is highlighted. 5 To navigate the thumbnail index screen, press: • to browse through the files and folders. • ENTER to view a highlighted photo full screen, or open a highlighted folder.
Dynex 16" LED TV DX-16E220NA16 Viewing your favorite photos 3 Press ENTER to access the menu. After you have created your favorite photo list, you can browse your favorite photos quickly. 1 Switch to USB mode (see “Switching to USB mode”...
DX-16E220NA16 Dynex 16" LED TV Viewing photos in a slideshow 3 Press ENTER to access the menu. 1 Switch to USB mode (see “Switching to USB mode” on page 37). 4 Press to highlight View Slideshow, then press ENTER. A slideshow begins with the first photo 2 Press to access the menu.
Dynex 16" LED TV DX-16E220NA16 Customizing slideshow settings 4 Press to highlight Settings, then press ENTER. You can customize the slideshow settings by selecting Repeat, Shuffle, Speed, and Transition settings. 1 Switch to USB mode (see “Switching to USB mode”...
DX-16E220NA16 Dynex 16" LED TV Adjusting the picture • Contrast—Adjusts the brightness of the light areas of the picture. • Brightness—Adjusts the brightness of the dark areas of the picture. Adjusting the TV picture • Color—Adjusts the color intensity of the picture. A 1 Press MENU.
Dynex 16" LED TV DX-16E220NA16 • Aspect Ratio—Adjusts how the picture fills the Automatically adjusting the aspect ratio screen. You can set the picture mode your TV uses when you turn it on. Aspect ratio option Example 1 Press MENU.
DX-16E220NA16 Dynex 16" LED TV Adjusting the sound • MTS/SAP—(Analog channels only) Selects the audio mode. You can select: • Mono—Select this option if there is noise or Adjusting sound settings static on weak stereo broadcasts. • Stereo—Select this option for programs 1 Press MENU.
Dynex 16" LED TV DX-16E220NA16 Setting parental controls 4 Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to something you can Parental controls let you prevent your children from remember.
DX-16E220NA16 Dynex 16" LED TV Locking control buttons Setting the system lock When the button lock is turned On, the buttons on the You must turn on the system lock before you can select top of your TV are locked, and you can only operate your and change the Block Unrated TV, US, or Canada TV using the remote control.
Dynex 16" LED TV DX-16E220NA16 Blocking unrated TV 7 Press to select On (blocks unrated TV) or Off (does not block unrated TV). When Block Unrated TV is turned on, you block TV 8 Press MENU to return to the previous menu, or press programs that do not have a rating.
Page 52
DX-16E220NA16 Dynex 16" LED TV Canadian rating levels 4 Press the number buttons to enter the four-digit password. Canadian English ratings Exempt programming Suitable for all children Suitable for children 8 and older General audiences Parental guidance suggested Suitable for children 14 and older...
Dynex 16" LED TV DX-16E220NA16 Adjusting time settings Downloading rating information 1 Press MENU. 2 Press to highlight Settings, then press . Setting the clock 1 Press MENU. 2 Press to highlight Settings, then press . 3 Press ENTER. 3 Press to highlight Time, then press ENTER.
DX-16E220NA16 Dynex 16" LED TV Using closed captioning Setting the sleep timer You can set the amount of time before your TV automatically turns off. Closed captioning displays a text version of the TV 1 Press MENU. program audio or displays information provided by the broadcaster.
Dynex 16" LED TV DX-16E220NA16 Selecting the analog closed captioning mode Selecting the digital closed captioning mode Analog channels usually have one or more closed Digital channels usually have one or more closed captioning modes. The CC1 mode usually displays a text captioning modes.
DX-16E220NA16 Dynex 16" LED TV Customizing digital closed captioning styles 8 Press to highlight an option, then press to adjust the style. You can select: 1 Press MENU. • Font Style—Selects the font style. 2 Press to highlight Settings, then press .
Dynex 16" LED TV DX-16E220NA16 Labeling an input source 5 If you select Custom, press to highlight Custom Label, then press . You can add a label to a video input source to make it easier to identify. These labels are displayed on the INPUT SOURCE list and on the banner that appears when you press INFO.
DX-16E220NA16 Dynex 16" LED TV 3 Press to highlight Auto Channel Scan, then Hiding channels press ENTER. You can hide channels in the channel list. When you press CH or CH , your TV skips the hidden channels. – You can still tune to a hidden channel by pressing the number buttons for the channel.
Dynex 16" LED TV DX-16E220NA16 Setting up a favorite channel list Viewing a favorite channel You can create a favorite channel list so you can quickly 1 Press FAV on your remote control. The Favorites browse through your favorite channels by pressing FAV, channel list opens.
DX-16E220NA16 Dynex 16" LED TV Maintaining 5 Press to move to the channel label field. • Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.
Dynex 16" LED TV DX-16E220NA16 4 Press to select Yes (to reset all settings to Video and audio factory default), or No (to not reset). If you select Yes, your TV turns off, then turns on again. The Setup Problem Solution Wizard opens.
Page 62
DX-16E220NA16 Dynex 16" LED TV Problem Solution Problem Solution Dark, poor, or no Only snow (noise) • Try another channel. The station • Try another channel. The station picture (screen is appears on the may be experiencing problems. may be experiencing problems.
Dynex 16" LED TV DX-16E220NA16 Problem Solution Problem Solution The picture has a After images • A few bright or dark spots on an • Do not display a still image, few bright or dark appear. LCD screen is normal. It does such as a logo, game, or spots.
DX-16E220NA16 Dynex 16" LED TV General Problem Solution One or more Problem Solution • Make sure that the channels are channels do not not blocked. See “Setting parental No power. display. • Make sure that the AC power control levels” on page 47.
Dynex 16" LED TV DX-16E220NA16 Specifications Outputs Video Specifications are subject to change without notice. Analog audio/Headphone 1 (side) Digital audio 1 (coaxial) (side) Dimensions and weight WiFi 14.9 × 9.9 × 2.2 in. (37.8 × 25.3 × 5.6 cm)
Universal remote control makes and models One for All 0054 You can operate your Dynex TV with a new or existing universal remote control. Phillips 0198, 0490 1 See the table below for common codes. If you have...
• Consult the dealer or an experienced radio/TV technician for permissions and limitations under the License. help. If you require additional information please call the Dynex support line at 1-800-305-2204. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Products and parts replaced under this warranty THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, become the property of Dynex and are not returned to you. If service WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY of Products or parts are required after the Warranty Period expires, you PERIOD.