Sony DSR-250 Service Manual page 73

[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the CAMERA Section
To check the CAMERA Section, set the CAMERA to the "forced CAMERA power ON" mode.
Setting the "Forced CAMERA Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press
the PAUSE button of the adjustment remote
commander.
VIDEO IN/OUT
JK-197 board
FP-242 flexible board (39P)
NO-001 board
ON-001
CD-274 board (50P)
Lens block assembly
Exiting the "Forced CAMERA Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote
commander.
3) Select page: 0, address: 01, and set data: 00.
LANC jack
VIDEO OUT
A B
Harness (VG-052) (12P)
board
FP-243 flexible board (27P)
2-12
TV monitor
Adjustment remote
commander (RM-95)
12V
Regulated power supply
DD-146 board
B
A
How to make the DC cable
(See page 2-1)
IN-057 board
VI-156 board
Control switch block (CF-1044)
AC IN