Camera Section Adjustment; Preparations Before Adjustment; List Of Service Tools - Sony DSR-250 Service Manual

5-1. CAMERA SECTION ADJUSTMENT

1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.

List of Service Tools

• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
ND filter 1.0
J-2
ND filter 0.3
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
Adjustment remote commander
J-5
(RM-95 upgraded) (Note1)
J-6 Siemens star chart
J-7 Clear chart for pattern box
J-8 CPC-13 jig
J-9 Mini pattern box
J-10 Camera table
J-11 Cleaning fluid
J-12 Wiping cloth
Super fine applicator
J-13
(made by NIPPON APPLICATOR (P752D))
J-14 Mirror (Small oval type)
J-15 Screwdriver for tape path
J-16 Mode selector conversion board (R)
J-17 Tracking tape (XH2-1A1)(NTSC/PAL)
J-18 Mini DV torque cassette
J-19 Mode Selector
J-20 Mode Selector ROM
J-21 FLOIL Grease (SG-941)
J-22 Cassette refernce plate
J-23 Reel reference plate
J-24 TG2/7 preset plate
J-25 Relay board for tension regulator adjustment
J-26 Board for tension regurator adjustment
J-27 Circular connector (PF, XLR4P)
Note1: If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
Note 2: ROM for version upgrading to allow use of the mode selector II
with the R mechanism.
Note 3: Refer to "1-1-3. How to make the DC cable".
• Color monitor
• Digital voltmeter
Name
• Vectorscope
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A White balance check
J-6080-818-A White balance check (2 sheets used)
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
J-6082-443-A For adjusting the video section
J-6082-353-B For adjusting the flange back
J-6082-384-A For adjusting the flange back
Y-2031-001-0
7-741-900-53
—
J-6080-840-A
J-6082-026-A Tape path for adjusting tape guide
J-6082-460-A
8-967-999-03
J-6082-360-A For FWD torque, REV torque and FWD back tension
J-6082-282-B For all operating
J-6082-314-E Corresponds to R mechanism (Note 2)
7-622-601-39
J-6082-330-A
J-6082-331-A
J-6082-459-A
J-6082-461-A
J-6082-359-A
1-783-189-11 For connecting the regulated power supply (Note 3)
5-4
Usage