Muratec MFX-3530 Printer Manual page 30

12
When the optional devices are attached to your machine, select the device name
from the pull-down menu.
13
Click [Continue] (or [OK] for OS X 10.7).
•The printer name is added to the list of registered printers on the left of the "Print & Fax" (or
"Print & Scan" for OS X 10.7) screen.
•If you click [Cancel], the settings are canceled and the display returns to the optional unit
selection screen.
14
Click [×] to close the screen.
„ Installing to Mac OS X 10.2 or 10.3
1
Insert the installation disk into the CD-ROM drive of the computer.
2
Double-click the CD-ROM and open the folder with the name that has the OS
version of your computer.
3
Launch the installer "Muratec MFX-**** PS.pkg". (***** should include your
machine name, such as MFX-3530.)
4
Follow the instructions in the installer to perform the procedure.
5
After the installation is finished, restart the computer.
6
Remove the installation disk from the CD-ROM drive after restarting the
computer.
7
Select "Utilities" from the "Go" menu.
For OS X 10.2, select "Applications" from the "Go" menu.
8
Click "Printer Setup Utility".
For OS X 10.2, click "Print Center".
9
Click [Add] displayed on the "Printer List" screen.
10
Select "IP Printing" from the pull-down menu, and enter the required items.
•For OS X 10.3, select "LPD/LPR" from the "Printer Type" pull-down menu.
•Enter the IP address or DNS name for the printer to connect in the "Printer Address" (for
OS X 10.3) or "Printer's Address" (for OS X 10.2) field.
•If necessary, for OS X 10.2, deselect "Use default queue on server", and enter the name to
display in "Queue Name" field.
•If you click [Cancel], the settings are canceled and the display returns to the IP print
settings screen.
Installing to Mac OS X
1
1-23