Muratec MFX-3530 Printer Manual page 14

7
Specify the location to install the utilities, and click [Next >].
•This screen may be displayed, depending on the selected drivers and utilities.
•You can click [Browse] to display the folder browsing dialog and specify the installation
location.
8
Enter the IP address of the machine to connect to, and click [Next >].
•If you do not know the IP address, you can detect the IP address of connected devices on
the "Device Search" screen. First, click [Search] to display the device search screen. If the
"Windows Security Alert" screen is displayed, click [Unblock] or [Allow access], and then
click [Refresh] if the device is not detected. Select the device name from the list, and click
[OK]. (The "Windows Security Alert" screen is not displayed from the second time you
perform this operation.)
•If you want to create a shortcut to OfficeBridge on the desktop, select "Create the shortcut to
OfficeBridge".
9
Click [Install].
10
When the installation completes, a screen indicating that the installation is
complete is displayed. Click [Finish].
11
Set up user authentication and security print test print as needed.
•For details on the user authentication, see
•For details on the security printing test, see
12
Click [Exit] to complete the installation.
13
Remove the installation disk from the CD-ROM drive.
NOTE
When the optional devices are attached to your machine, see
options" (page 1-20)
"Setting up user authentication" (page 1-8).
"Security printing test" (page 1-9).
to enable these device.
"Setting up printer
Installing to Windows
1
1-7