Level The Range - Wolf 762 Installation Manual

Gas Range Installation
Oven Door Removal
REINSTALL OVEN DOOR
1) Hold the oven door on both sides and position it with
door hinges aligned with openings in the oven frame.
2) Holding the oven door approximately 30° from vertical,
slide the hinges into the openings until the bottom
hinge arms drop fully into the receptacles.
3) Open the oven door all the way and remove the hinge
pin from the hinge arm.
4) Reinstall the hinge retainer plate with upper and lower
mounting screws.
5) Open and close the door completely to ensure that it is
properly installed.
6) For double oven ranges, complete these steps for both
oven doors.

Level the Range

IMPORTANT NOTE: The top of the range must be level.
Use both the adjustable front legs and the adjustable rear
casters to level the range.
The front legs of the range are adjusted by rotating the
bottom hexagonal portion of the leg. The rear casters can
be adjusted by rotating the nut on the caster. Using the
height adjustment wrench (supplied with the range), rotate
the nut clockwise to raise the range or counterclockwise
to lower. Refer to the illustration below. The range legs and
casters allow for a 1" (25) height adjustment.
CASTER
ADJUSTMENT
HEIGHT
ADJUSTMENT
WRENCH
Rear caster adjustment.
16