TP-Link TL-WA701ND Installation Manual page 12

Hide thumbs Also See for TL-WA701ND:

Select Use the following IP

address

Enter the 192.168.0.100 into the

IP address field, 255.255.255.0

into the Subnet mask field

Click OK

Now, try to log on to the Web-based configuration page again after the above

settings have been configured. If you still cannot access the configuration page,

please restore your Access Point's factory default settings and reconfigure your

Access Point following the instructions of this QIG. Please feel free to contact our

Technical Support if the problem persists.

While the reconfiguration is done, you need to change the IP address

Note

settings as below. Then, with the correct hardware connection, you can surf

the Internet successfully.

Select Obtain an IP address

automatically

Select

Obtain

DNS

address automatically

server

Table of Contents