Additional Documentation - HP ProLiant MicroServer Installation Sheet

6. ODD cable routing:
6a. ODD cable connects the ODD to the system board ODD
connector (J24).
6b. SATA connector connects the SATA ODD cable to the power
cable P6.
7. After installing the ODD module and connecting the ODD cables,
slide the top panel to reinstall into the chassis.
8. Fasten the back screw to secure the top panel on the chassis.
9. Close the panel door of the server.
10. Use the HP ProLiant MicroServer's key to lock the panel door.
NOTE: Using ODD or USB Key are customer options for HP
ProLiant MicroServer OS installation.

Additional Documentation

Legal notices
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number 615715-003
September 2010 (Third Edition)