Frequently Asked Questions - Toshiba L2436DB User Manual

Q
Why is there no sound or picture?
A
Check that the television is on and that all
connections are made properly.
Q
There is a picture, but why is there little
or no colour?
The colour is factory set to Auto to
automatically display the best colour
A
system.
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
Q
Why doesn't the video/DVD being
played show on-screen?
Make sure the Media player or DVD player
A
is connected to the television, then select
the correct input by pressing
Q
Why is there a good picture but no
sound?
Check all cable connections and that the
A
volume has not been turned down or that
the sound has not been muted.
Q
What else can cause a poor picture?
Interference or a weak signal. Try a
A
GLIIHUHQW WHOHYLVLRQ VWDWLRQ 0DQXDO ¿QH
tuning may help:
1.
Select the ATV Manual Tuning in the
Installation menu.
Highlight the station and press
RU WR VHOHFW Manual Fine Tuning.
2.
8VLQJ RU WR DGMXVW WR JHW WKH EHVW SLFWXUH
and sound. Press
Q
Why doesn't the remote control work?
A
Check that the batteries aren't exhausted
or inserted incorrectly.

Frequently Asked Questions

.
 WKHQ SUHVV
and then RETURN.
Q
Why are there problems with text?
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
A
satellite or cable connection. Go to the
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some detail.
Q
Why are the four coloured text numbers
visible but no text (Analogue Only)?
Text has been selected while viewing
an external source. No text will appear
A
on-screen or a box may appear stating
no information is available. Select a
broadcasting channel and press
access.
Q
:KDW FDQ EH GRQH LI WKH XVHUGH¿QHG
password has been forgotten?
A
Use the universal password 0000, then
change to a new number of your choice.
Q
What don't the devices connected via
HDMI operate properly?
Make sure to use cables with the HDMI
logo (
A
equipment may not work properly with the
latest HDMI TV products, due to adoption
of new standards.
Q
Why is the Media Player/DVD picture in
black and white?
A
Check the correct input has been chosen:
S-VIDEO or AV.
Q
Why did TV turn off by itself?
After roughly 15 minutes without any input
A
video signal at TV mode, the TV will turn
off to reduce power.
53
to
®
). Some early HDMI