Frequently Asked Questions - Toshiba L243 D Owner's Manual

Q
Check that the television is on and that
A
all connections are made properly.
Q
The colour is factory set to Auto to
automatically display the best colour
system.
A
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
With the external source playing, select
1
Manual setting in the SETUP menu.
2
NTSC 4.43, NTSC 3.58, SECAM or PAL.
Manual setting
Colour system: Auto
EXT 1
Select Change
Q
Make sure the Media player or DVD
A
player is connected to the television, then
select the correct input by pressing
Q
Check all cable connections and that the
A
volume has not been turned down or that
the sound has not been muted.

Frequently Asked Questions

Auto,
A
Save Back
OK RETURN
.
Q
Interference or a weak signal. Try a
A
tuning may help:
Select the ATV Manual Tuning in the
1
SETUP menu.
Highlight the station and press
tuning.
1 DK
Select
2
picture and sound. Press
RETURN.
Q
Check that the batteries aren't exhausted
A
or inserted incorrectly.
Q
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
A
satellite or cable connection. Go to the
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some detail.
Q
Text has been selected while viewing
an external source. No text will appear
on-screen or a box may appear stating
A
no information is available. Select a
broadcasting channel and press
access.
54
, then
ATV Manual Tuning
Position
A C 69 0 − − − − −
Change Save
OK RETURN
and then
Back
to