Table of Contents
Advertisement
Installation and Important Information
Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place the TV set on a stable, level surface that can support the weight of the TV.
The LCD display panels are manufactured using an extremely high level of precision technology, however
sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a
sign of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will
break or damage the screen, and that small items cannot be inserted into slots or openings in the case.
Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.
Studies indicate that plastics may weaken and crack over time from the combination effects of
chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions
could result in serious injury and/or permanent damaged to TV and TV pedestal.
Cleaning the screen and cabinet...
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not
use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please use a wall bracket appropriate for the size and weight of the LCD TV.
‡ Two people are required for installation.
‡ To install a wall-mount from another manufacturer.
1. Unplug and remove any cables and/or other connections from the rear of the TV.
2. &DUHIXOO\ OD\ WKH IURQW RI WKH XQLW IDFH GRZQ RQ D ÀDW FXVKLRQHG VXUIDFH VXFK DV D TXLOW RU EODQNHW
3. Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with
the wall bracket.
4. Always use the screws supplied or recommended by the wall mount manufacturer.
Removing the Pedestal Stand:
1. &DUHIXOO\ OD\ WKH IURQW RI WKH XQLW IDFH GRZQ RQ D ÀDW FXVKLRQHG VXUIDFH ZLWK WKH VWDQG KDQJLQJ RYHU WKH HGJH
2. Remove the screws.
3. After the screws are removed, hold the pedestal stand in place, then remove it from the TV by sliding
away from the bottom of the TV.
NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
ILLUSTRATION SHOWS 40L24**
Where to install
When using a Wall Bracket
40''
50''
5
Advertisement
Table of Contents
