Problem Solving; Questions And Answers - Toshiba REGZA ANALOGUE Series Manual

PROBLEM SOLVING

Questions and
Below are the answers to some of the most
common queries.
For more information go to www.toshiba.co.uk
Q
Why is there no sound or picture?
A
Check the television is not in standby mode. Check the
mains plug and all mains connections.
Q
There is a picture, but why is there little or no
colour?
A
When using an external source, for instance, a poor
quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
colour is factory set to Auto. to automatically display
the best colour system.
To check that you have the best colour:
a
With the external source playing, select Manual
setting from the SET UP menu.
b
B b
With or choose between Auto., PAL, SECAM,
NTSC4.43 or NTSC3.58.
Q
Why doesn't the video/DVD being played show on
screen?
A
Make sure the media recorder or DVD player is
connected to the television as shown on page 8, then
select the correct input by pressing
Q
Why is there a picture but no sound?
A
Check all lead connections.
No sound or unacceptable format sound may be
received.
Check the volume has not been turned down or that
sound mute has not been selected.
* RV6**P Series only
Answers
o
.
Q
Why is the VCR/DVD picture in black and white?
A
Check that the correct input setting, S-VIDEO or AV,
has been selected for EXT2 in the AV connection
menu.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a different television
station. Manual fine tuning may help.
a
Select the Manual tuning menu. Highlight the station
Q
and press
tuning.
b
B b
Using or
Q
Press and then EXIT.
Q
Why don't the controls of the television work?
A
Check that Panel lock is not On.
Q
Why doesn't the remote control work?
A
Check that the mode switch on the remote control is
in TV mode*.
Check that the batteries aren't dead or inserted
incorrectly.
Q
Why are there vertical stripes on the screen when in
PC mode?
A
The Sampling clock may need adjustment. Select PC
Setting from the SET UP menu, highlight Sampling
clock and adjust until the lines clear.
34
c
, then press to select Manual fine
adjust to get the best picture and sound.