Selecting An Nd Filter; Setting The Sensitivity (Ei Value) (Cine Mode); Setting The Color Temperature - Sony F65 Operation Manual

3-3-4 Selecting an ND Filter

The camera has built-in optical ND filters that can be used
to match the illumination and natural lighting conditions.
The following filters can be selected in F65RAW mode or
HD mode. In F65RAW-HFR mode, the filter is fixed to
Clear.
Filter density Description
Clear No filter is used.
0.9 1/8 optical transmittance
1.2 1/16 optical transmittance
1.5 1/32 optical transmittance
1.8 1/64 optical transmittance
1
Select the ND filter on settings page 1, and press the
MENU SEL/ENTER dial.
Settings page 1
2
Turn the MENU SEL/ENTER dial to select the ND
filter, then press the MENU SEL/ENTER dial.
To set using the VF menu
Set the ND Filter on the <Base Setting> page in the
Camera menu (page 47).
3-3-5 Setting the Sensitivity (EI
Value) (Cine Mode)
The sensitivity is determined by the EI value (Exposure
Index). The viewfinder and monitor image brightness
changes to match the EI value. But it has no affect on the
recorded image.
The camera supports the following sensitivity settings:
200EI, 250EI, 320EI, 400EI, 500EI, 640EI, 800EI,
1000EI, 1250EI, 1600EI, 2000EI, 2500EI, and 3200EI.
1
Select the sensitivity on settings page 1, then press the
MENU SEL/ENTER dial.
30
Basic Settings using the Subdisplay
Settings page 1
2
Turn the MENU SEL/ENTER dial to select the EI
value, then press the MENU SEL/ENTER dial.
To set using the VF menu
Set the Exposure Index on the <Base Setting> page in the
ND filter
Camera menu (page 47).
Latitude values
The latitude is automatically assigned one of the following
values, depending on the sensitivity setting.
Sensitivity (EI value)
200EI
250EI
320EI
400EI
500EI
640EI
800EI
1000EI
1250EI
1600EI
2000EI
2500EI
3200EI
The value is displayed in "xxEI" format and represents the
highlight latitude displayed as a lens aperture value (f-
stop) for key light from a gray chart with 18% reflectivity.

3-3-6 Setting the Color Temperature

The color temperature can be set to 3200K (tungsten),
4300K (tungsten), or 5500K (daylight) to match the
shooting environment.
Sensitivity
Latitude
4.0E
4.4E
4.7E
5.0E
5.4E
5.7E
6.0E
6.4E
6.7E
7.0E
7.4E
7.7E
8.0E