Windows Xp - Linksys Instant PowerLine PLEBR10 User Manual

Windows XP

1. Windows XP will automatically detect the presence of the USB Adapter in
your computer after you have completed the hardware installation. Click the
radio button next to Install from a list or specific location (Advanced).
Then click the Next button.
2. Click the radio button next to Search for the best driver in these loca-
tions. Select Include this location in the search:, and enter C:\Program
Files\Linksys\USB Drivers in the location field (if "C" is the letter of your
hard drive). Then click the Next button.
24
Instant PowerLine
Figure 9-10
Figure 9-11
Series EtherFast
TM
3. Windows will notify you that the driver has not passed Windows Logo test-
ing. Click the Continue Anyway button.
4. Windows will tell you when it has finished installing the new driver. Click
the Finish button.
Proceed to Chapter 10: Using the Instant PowerLine Security
10/100 Bridge and USB Adapter
®
Figure 9-12
Figure 9-13
The Windows XP driver installation is now complete.
Configuration Utility.
25