Table of Contents
Advertisement
2. ETHERNET: Use an Ethernet cable to connect a computer to one of
these ports for initial configuration and/or Internet access.
3. USB 2.0: Connect a USB (version 2.0 or lower) memory stick or a
USB hard drive for file sharing. The FSG2200HNU automatically
detects the USB device.
4. PHONE: Use a telephone cable (and any telephone adaptor provided
with your FSG2200HNU) to connect a telephone to the PHONE 1 or
PHONE 2 port. If you only have one telephone, you should use port 1.
5. Use the power adaptor provided with your FSG2200HNU to connect
an appropriate power source to this socket.
6. Push the power button to the on position.
Look at the LEDs (lights) on the top panel of the FSG2200HNU.
• The POWER light blinks during start-up and is green once the
FSG2200HNU is ready.
• An ETHERNET light turns on if the corresponding ETHERNET port
is properly connected. An Ethernet port's light blinks when the
FSG2200HNU is sending or receiving data through it.
• The WPS/WLAN light stays green when the wireless LAN is ready.
It blinks when the FSG2200HNU is sending/receiving data through
the wireless LAN.
• The WAN light stays on if this port is properly connected and blinks
when transmitting data.
5
Advertisement
Table of Contents
