Intended Use; Operation - DeWalt DCT414 Instruction Manual

Red: servers as alarm to show that temperature has reached the
set maximum.
N. Battery charger
SCREEN ICONS: (FIG. 3)
Hold – Will display after you
release the trigger to let you know
the last temperature read.
Scan – Will display while you
hold the trigger down looking for
differing temperatures.
Alarm setting – this icon will let
you know what alarm you have
chosen to display; color indicator,
beep or both.
F or C – Indicates units of
measure for temperature
Battery – Will indicate how much
charge is remaining on the battery.
NOTE: The low battery indicator
is located directly above the
temperature reading on the screen. The bars on low battery
indicator will indicate the strength of the battery. The IR
Thermometer may continue to operate for a short time while the
batteries continue to drain, but the beams will quickly dim. After
fresh batteries are installed, and the IR Thermometer is turned on
again, the IR Thermometer will return to its full brightness.

INTENDED USE

The IR Thermometer measures surface temperatures by measuring the
amount of infrared emitted off the object. This type of measurement
is a non-contact measurement of the surfaces temperature. This tool
FIG. 3
comes fully assembled. This tool has been designed with features that
allow for quick and easy set-up.
M
Belt Hook (Fig. 2)
G
(Optional Accessory)
L
NOT suspend tool overhead or suspend objects from the belt hook.
ONLY hang tool's belt hook from a work belt.
H
the screw (P) holding the belt hook is secure.
IMPORTANT: When attaching or removing the belt hook, use only the
I screw (P) that is provided.
The belt hook (O) can be attached to either side of the tool using only
J
the screw (P) provided, to accommodate left- or right- handed users.
If the hook is not desired at all, it can be removed from the tool.
K
To move belt hook, remove the screw (P) that holds the belt hook in
place then reassemble on the opposite side.

OPERATION

turn tool off and disconnect battery pack before making any
adjustments or removing/installing attachments or accessories.
10
WARNING: To reduce the risk of serious personal injury, DO
Warning: To reduce the risk of serious personal injury, ensure
WARNING: To reduce the risk of serious personal injury,