Intended Use - DeWalt DCT414 Instruction Manual

D. Main handle
E. IR sensor
F. Laser/pointer beam
G. LCD screen
H. Alarm mode button: is used to select the type of alarm
and to set the high (HAL) and low (LAL) temperature limits
for the alarm.
Alarm 1 – temperature has reached the set limit, indicated by
the red/blue LED (M)
Alarm 2 – temperature has reached the set limit, indicated by
a beeper sound
Alarm 3 – temperature has reached the set limit, indicated by
both the LED and the beeper
I. Min/Max/Avg Mode Button: Displays either the lowest,
highest or average temperature.
J. Adjustment Button: Used with each mode button to set
desired value.
K. EMS Mode Button: Set emissivity value.
L. C/F Mode Button: Used to set temperature units of
measure (Celsius or Fahrenheit).
M. LED Indicator - Active in Alarm 1 and Alarm 3 modes.
Blue: serves as alarm to show that temperature has reached the
set minimum.
Red: servers as alarm to show that temperature has reached the
set maximum.
N. Battery charger
SCREEN ICONS:
Hold – Will display after you
release the trigger to let you know
the last temperature read.
Scan – Will display while you
hold the trigger down looking for
differing temperatures.
Alarm setting – this icon will let
you know what alarm you have
chosen to display; color indicator,
beep or both.
F or C – Indicates units of
measure for temperature
Battery – Will indicate how
much charge is remaining on the
battery.
NOTE: The low battery indicator
is located directly above the temperature reading on the screen.
The bars on low battery indicator will indicate the strength of
the battery. The IR Thermometer may continue to operate for a
short time while the batteries continue to drain, but the beams
will quickly dim. After fresh batteries are installed, and the IR
Thermometer is turned on again, the IR Thermometer will return
to its full brightness.

INTENDED USE

The IR Thermometer measures surface temperatures by measuring
the amount of infrared emitted off the object. This type of measurement
is a non-contact measurement of the surfaces temperature. This tool
comes fully assembled. This tool has been designed with features
that allow for quick and easy set-up.
38
FIG. 3
M
G
L
H
I
J
K