Instructions For Connecting The Extender; Figure 3-3: Connect The Composite Or S-Video Cable; Figure 3-4: Connect The Component Video Cables - Linksys WMCE54AG User Manual

Instructions for Connecting the Extender

1. If you are using composite or S-video, connect the video cable from the Extender's VIDEO output to your TV's
VIDEO input. Then make sure the VIDEO SELECT switch is set to the left.
If you are using component video, connect the component video cables (not included) from the Extender's
COMPONENT VIDEO output to your TV's COMPONENT VIDEO input. Then make sure the VIDEO SELECT switch
is set to the right.
OR

Figure 3-3: Connect the Composite or S-Video Cable

Chapter 3: Connecting the Media Center Extender
Instructions for Connecting the Extender
OR

Figure 3-4: Connect the Component Video Cables

Dual-Band Wireless A/G Media Center Extender
NOTE: Make sure the
Extender is powered off
before changing the position
of this switch.
13