Linksys WMCE54AG User Manual page 12

Dual-Band Wireless A/G Media Center Extender
AUDIO
The Extender offers two types of audio outputs, digital and analog. In most cases, you will use the AUDIO
(L and R) ports for analog audio; however, you have the option of digital audio if your TV offers a digital input.
DIGITAL The DIGITAL port is where you will connect the optical cable for digital audio output.
AUDIO (L and R) The L and R ports are where you will connect the left and right RCA audio cables.
VIDEO
The Extender offers three types of video outputs: composite (VIDEO port), S-video, and component video. In most
cases, you will use the VIDEO or S-VIDEO port; however, you have the option of component video if your TV offers
a component video input.
VIDEO The VIDEO port is where you will connect the RCA video cable.
S-VIDEO The S-VIDEO port is where you will connect the S-video cable.
VIDEO SELECT Use this switch to indicate the type of video the Extender is sending to your TV. For video or
S-video, set this switch to the left. For component video, then set this switch to the right.
COMPONENT
VIDEO These ports are where you will connect the component video cables (not included).
6
NOTE: Make sure the Extender is powered off before changing
the position of this switch.
Chapter 2: Getting to Know the Media Center Extender
Back Panel