HOW TO CHANGE THE TRIM PANEL
Unplug the power cords from the smoker and remove the smoke generator.
Lay the smoker tower on its back.
Remove both front large rubber feet.
Remove the 7 screws that hold the support plate on (4 silver screws, 3 black screws).
Remove the small C-Clip from the bottom door Hinge Pin.
Remove the support plate.
Remove the two small rubber feet.
Remove the bottom inspection panel.
Using a pair of pliers pull the bottom door Hinge Pin out.
Remove the 3 screws holding the Trim Panel on.
Replace the Trim Panel and reinstall the parts in reverse order.
Prepared by BN
Page 21