How To Test The On/Off Switch - Bradley Smoker BS611 Service Manual

HOW TO TEST THE ON/OFF SWITCH

 Unplug the Smoke Generator from the wall outlet.
 Remove side access panel.
 Remove On/Off switch from Smoke Generator.
 The On/Off switch has 3 terminals marked 1 – 2 – 3
 Terminal -1 White Wire = Neutral Line
 Terminal - 2 Brown Wire = Power wire to Control Box.
 Terminal - 3 Black Wire = Main Fused Power wire
 With a Meter, there should be continuity between terminals 1 & 2 when the switch is in the On
position.
Prepared by BN Page 18