Why Does My Generator Continuously Feed Bisquettes? - Bradley Smoker BS611 Service Manual

Why does my Generator continuously feed Bisquettes?

UNPLUG THE SMOKER FROM THE WALL OUTLET
 Check the manual advance button make sure it is not stuck in.

Open the generator by removing the
holding the access panel on.
 Tilt the access panel out slightly to clear the metal tabs, then pull down on the
panel to remove it.
 Check the connection to the Advance Button.
 Check to see if something is blocking the Internal Advance Stop Button.
Prepared by BN
2 screws on the bottom left-hand outside edge
Page 12