Using The Windows Xp Device Driver Rollback; Resolving Software And Hardware Incompatibilities - Dell SmartPC 100N Owner's Manual

FILE LOCATION: S:\SYSTEMS\Tang\owner\EMF\A00\8P550c20.fm
Click Device Manager.
6
Click Action and click Update Driver.
7
Click Install from a list or specific location (Advanced) and click
8
Next.
Verify that Search removable media is selected, and then click Next.
9
When the name of the appropriate driver appears, click Next.
10
Click Finish and restart your computer.
11

Using the Windows XP Device Driver Rollback

If you install a new device driver that causes system instability, you can use
the Windows XP Device Driver Rollback to replace the new device driver
with the previously installed version of the device driver. If you cannot
reinstall your previous driver by using the Device Driver Rollback process,
then use System Restore (see page 44) to return your operating system to its
previous operating state before you installed the new device driver. To use
Device Driver Rollback:
Click the Start button and right-click My Computer.
1
Click Properties.
2
Click the Hardware tab and click Device Manager.
3
In the Device Manager window, right-click the device for which the
4
new driver was installed and then click Properties.
Click the Drivers tab.
5
Click Roll Back Driver.
6
Resolving Software and Hardware
Incompatibilities
®
In the Microsoft Windows
device either is not detected during the operating system setup or is
detected but incorrectly configured. To check for IRQ conflicts on your
computer:
Click the Start button and click Control Panel.
1
DE LL CO NF I DE NTI A L – PR E LI M I N ARY 3/11 /02
®
XP operating system, IRQ conflicts occur if a
So l v i ng P r o bl e m s 43