Printing From Trays; Setting Paper In Trays 1 To 5 - Oki C911dn User Manual

Printing from Trays

Printing from Trays
z z
With the exception of some paper sizes, the printer automatically detects the size of paper set in trays
1
1 to 5 . Further, only the width of the paper size is automatically detected.
*
*: Trays 2 to 5 are optional.
Memo
z The printer does not automatically detect the following paper sizes.
- A3NOBI, tabloid extra, A3WIDE, 13×18"
-A5, A6
-postcards, Japanese double postcards
2
-legal13.5, legal14
-custom
If the printer does not detect automatically, use the control panel to set the paper size. For details, see
the Control Panel" (P.93).
z Set 13x18" as custom size.

Setting Paper in Trays 1 to 5

3
This section explains how to set paper in tray 1
or trays 2/3/4/5.
Memo
z In this section, setting paper in tray 1 is used as an
example. Set trays 2 to 5 using the same procedure.
1
Pull out the tray 1 paper cassette (
4
2
Slide the paper guide (
stopper (
paper that has been set.
).
3
Thoroughly sort the paper. Carefully
align the ends of the paper horizontally.
- 88 -
"Setting Paper Using
) and paper
) to align to the size of the