Mounting The Built-In Hdd (Optional) - Oki C911dn User Manual

Installing the Device
Mounting the Built-in HDD
(Optional)
1
Mount the (optional) built-in HDD to increase the
memory capacity or implement secure printing.
Reference
⿟ For the functions required by the HDD, see "Advanced".
„ Built-in HDD
2
1
Turn OFF the device power supply, and
remove the cables.
3
Note
⿟ When turning OFF the power supply, make sure
to press the power switch and wait for shutdown
before turning OFF (O) the main power switch.
Reference
⿟
"Connecting Power Cables" (P.51)
4
⿟
"Turning OFF the Power Supply" (P.52)
2
Loosen the screws on the access cover
at the back of the printer (
open the door (
), and
).
3
Check that the internal LED lamp (
OFF.
4
Align the screws (x2) on the built-in
HDD to the holes on the device.
5
Rotate the screws (x2) in the direction
of the arrows to tighten securely.
6
Connect the HDD connectors to the
device.
- 48 -
) is