Therapy Data; Data Transmission - ResMed Lumis 100 VPAP S User Manual

Therapy data

Your Lumis device records your therapy data for you and your care provider so they can view and
make changes to your therapy if required. The data is recorded and then transferred to your care
provider wirelessly or via an SD card.

Data transmission

Your Lumis device has the capability of wireless communication so that your therapy data can be
transmitted to your care provider to improve the quality of your treatment. This is an optional feature
that will only be available if you choose to benefit from it. It also allows your care provider to update
your therapy settings in a more timely manner or upgrade your device software to ensure you
receive the best therapy possible.
The data is usually transmitted after therapy has stopped. In order to make sure that your data is
transferred, leave your device connected to the mains power at all times and make sure that it is not
in Airplane Mode.
Notes:
Therapy data might not be transmitted if you use it outside of the country or region of purchase.
•
• Devices with wireless communication might not be available in all regions.
SD card
An alternative way for your therapy data to be transferred to your care provider is via the SD card.
Your care provider may ask you to send the SD card by mail or to bring it in. When instructed by
your care provider, remove the SD card.
Do not remove the SD card from the device when the SD light is flashing.
To remove the SD card:
1. Open the SD card cover.
2. Push in the SD card to release it. Remove the SD card from the device.
Place the SD card in the protective folder and send it back to your care provider.
For more information on the SD card refer to the SD card protective folder provided with your
device.
Note: The SD card should not be used for any other purpose.
English 11