LG 42PJ350 Training Manual page 121

Front Control (IR and Intelligent Sensor) Board and Power LED Bo
Front Control (IR and Intelligent Sensor) Board and Power LED Bo
Front IR Board
P100
P100
To Main
To Main
To remove P101 ribbon, using your fingernail, lift up the lockin
To remove P101 ribbon, using your fingernail, lift up the lockin
mechanism. Slide the board out to the left to release the ribbon
mechanism. Slide the board out to the left to release the ribbon
To facilitate reinstallation, slide the board to the right
To facilitate reinstallation, slide the board to the right
just enough to place a slight bow in the ribbon cable,
just enough to place a slight bow in the ribbon cable,
then using a small object, press down gently on the ribbon. When
then using a small object, press down gently on the ribbon. When
seated, the ribbon will be under the two plastic tabs in the con
seated, the ribbon will be under the two plastic tabs in the con
P101
P101
To Soft Touch
To Soft Touch
Key Board
Key Board
Lower Left Side (As viewed from rear).
Lower Left Side (As viewed from rear).
Soft Touch Soft Touch
Key Pad
Key Pad
g
g
cable.
cable.
properly
properly
nector.
nector.
121 August 2010
ard Location
ard Location
Soft Touch Key Pad
Thin strip adhered to
the protective front
glass.
42PJ350 Plasma