LG 42PJ350 Training Manual page 114

Main Board Removing the LVDS Cable or Power Supply Connector
Main Board Removing the LVDS Cable or Power Supply Connector
(1) Using your fingers and press in gently on the two locking tabs.
Then rock the connector out of the plug.
(2) Pull the Cable from the Connector
by rocking back and forth.
If the Connector Locks have been
damaged and will not release, use a thin
object and slide straight down (as
indicated by the arrows below) and
release the locks.
114 August 2010
P301 or P703
42PJ350 Plasma