QSC GXD 4 User Manual page 9

PRESET RECALL
Recall a preset to configure the amplifier to meet the requirements of your loudspeakers and installation.
There are 20 Presets. See
1. From HOME
ENTER
2. B PRESET,
3. B PRESET RECALL,
4. B the preset you want,
PRESET SAVE
Saves the active preset with any DSP changes. See
1. From HOME
ENTER
2. B PRESET,
3. B PRESET SAVE,
PRESET SAVE AS
Select the LOCATION and/or change the NAME to save changes you make to the DSP.
Figure 20 Figure 21
See and
SP
1. From HOME ENTER
FR
2. B PRESET,
DE
3. B PRESET SAVE AS,
CH
4. B LOCATION
5. B the LOCATION (P1 to P20),
AR
6. B NAME,
7. B letter, number, hyphen, or space
8. B SAVE, ENTER
STEREO DSP or DSP A and DSP B
STEREO DSP is set for both channels equally, at the same time. Separate DSPs (DSP A and DSP B) are set independently for each channel. Any
changes you make are made in real time – you hear the change as it is being made.
NOTE!: The term "STEREO DSP" is used in this document as a generic term to mean either STEREO DSP or DSP A/DSP B, unless
specifically noted.
SENSITIVITY
See Figure 22 through Figure 24
1. From HOME ENTER
2. B STEREO DSP,
3. B SENSITIVITY,
4. B 1.2V (+4 dBu) or 3.9V (+14 dBu), TOUCHMIX,
TD-000450-01-A
Figure 18
ENTER
ENTER
ENTER ENTER
Figure 19
ENTER
ENTER ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
9 (DRAFT 2015/20/07)
repeat. When finished
EXIT
DSP A+B> SENSITIVITY
SENSITIVITY: 3.9V (+4dBu)
SENSITIVITY: 1.2V (+4dBu)
— Figure 22 —
ENTER
PRESET > RECALL
P20: MONO SUBS 100 HZ
1 A
ST
DSP
2
B
ENTER TO SELECT
— Figure 18 —
P1: ST SAT FULL RANGE
PRESET RECALL
PRESET SAVE
PRESET SAVE AS
ENTER TO SELECT
— Figure 19 —
PRESET > SAVE AS
P20: MONO SUBS 100 HZ
LOCATION NAME SAVE
ENTER TO SELECT
— Figure 20 —
PRESET > SAVE AS
P20: MONO SUBS 100 HZ
ENTER: PRESS TO ADVANCE
HOLD TO ACCEPT
— Figure 21 —
STEREO DSP> SENSITIVITY
SENSITIVITY: 3.9V (+14dBu)
SENSITIVITY: 3.9V (+14dBu)
— Figure 23 —
DSP A+B> SENSITIVITY
SENSITIVITY: TOUCHMIX
SENSITIVITY: TOUCHMIX
— Figure 24 —