Panasonic WV-NP244 Operating Instructions Manual page 9

Otherwise, the camera may not work
properly or performance deterioration
may be caused.
• Images saved on the SD memory card
may lead to personal information leak-
age. When it is necessary to give the
camera to someone, even when for
repair, make sure the SD memory card is
removed from the camera.
• There are limited times to overwrite on an
SD memory card.
It is recommended to replace the SD
memory card when having a periodic
maintenance of the camera.
Do not aim the camera at strong light
sources.
A light source such as a spot light causes
a blooming (light bleeding) or a smear
(vertical lines).
Smear
Blooming
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with
IEEE802.3af standard.
Broadband router
When it is necessary to use a broadband
router to connect the camera to the Internet,
use a broadband router with the port for-
warding function (NAT, IP masquerade).
Refer to the Network Operating Instructions
(PDF) for further information about the port
forwarding function.
Blight subject
Radio interference
When the camera is used near TV/radio
antenna, strong electric field or magnetic
field (near a motor or a transformer), images
may be distorted and noise sound may be
produced.
Do not install the camera in a humid or
dust-laden environment.
Otherwise, lifetime of the internal parts may
be shortened.
9