Samsung NX500 User Manual page 145

Connecting to a smart phone
Connecting & Transferring >
1
In Shooting mode, press [R].
You can also press and hold [R] to launch the MobileLink feature
directly.
2
Touch .
If the pop-up message that prompts you to download the
application appears, select Next.
If you use a Wi-Fi manual connection to connect the camera and a
smart phone, you can enable the Wi-Fi Privacy lock. (p. 180)
If you use a Wi-Fi manual connection to connect the camera and a
smart phone, the Bluetooth feature is not available.
3
On the smart phone, turn on Samsung Camera Manager.
To start the application automatically on an NFC-enabled smart
phone, turn on the function and place the smart phone near
the NFC tag (p. 32) on the camera. Verify that the smart phone is
connected to your camera, and then skip to step 6.
4
Select the camera from the list on the smart phone.
The smart phone can connect to only one camera at a time.
If the Wi-Fi Privacy lock is enabled and Wi-Fi is connected, enter the
PIN displayed on the camera into the smart phone.
5
On the camera, allow the smart phone to connect to your
camera or confirm the registration request.
If the smart phone has been connected to your camera before, it is
connected automatically.
If the pop-up message that prompts you to set the auto time
setting appears, select Yes to sync the camera's date and time to
the smart phone's. (p. 180)
6
Select files to transfer.
7
On the smart phone, touch
The camera will send the files to the smart phone.
.
144