Table of Contents
Advertisement
Flash
Shooting Functions >
You can also drag the slider or touch
Adjusting the flash intensity may not be effective when:
-
The subject is too close to the camera.
-
You set a high ISO sensitivity.
-
The exposure value is too big or too small.
-
It is too bright or too dark.
In some shooting modes, you cannot use this function.
If you attach an intensity-adjustable external flash to the camera, the intensity
settings of the flash will be applied.
If the subject is too close when you use the flash, some light may be blocked,
resulting in a dark photo. Ensure that the subject is within the recommended
range, which varies by lens.
When a lens hood is attached, the light from the flash can be blocked by the
hood. Remove the hood to use the flash.
/
to adjust the intensity.
Flash settings
Set the flash mode, exposure value, flash brightness, or multi flash when
you attach an external flash to the camera. You can also set wireless sync to
control the external flash. The flash settings are supported only when you
attach a compatible, optional external flash (SEF-580A).
Setting external flash
In Shooting mode, press [m]
To set external flash,
Settings
b
External Flash
an option.
108
Advertisement
Table of Contents
