CLONING MODE STATUS INDICATOR
To enter cloning mode, press and hold both the PTT button and (-) button at the same time, while
turning ON the radio.
Cloning Mode Status
Cloning Mode (by default is Serial)
Switch to Wireless Cloning [initated
by (-) button]
Switch to Serial Cloning [initated by
(-) button]
Clone [initiated by (+) button] –
Cloning in progress
Cloning Successful
Cloning Fail
102
English
Table 1: Cloning Mode Status Indicator
LED Indicator
Double Blink Red
Double Blink Red
Double Blink Red
Solid Red
Not Available
Not Available
Voice Prompt or Tone
"Clone Mode, Serial"
"Wireless"
"Serial"
Cloning beeps
"Pass"
"Fail"