Fx Rotary Speaker Horn Speed - Clavia NordStage2 EX 88 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

and reverts back to slow when the pedal is released. Rotor Toggle

means that the fast/slow rotor speed is switched with each pedal

depression, like an on/off switch pedal.

Range: Latch, Rotor Hold (default), Rotor Toggle

Ctrl Pedal Type

The Stage 2 EX accepts many of the most commonly available control

pedals the Ctrl Pedal input. Select a setting here that matches the

pedal that you use.

If you operate a connected pedal while this option is active, a

percentage will be displayed from 0 to 100 to indicate the range

of the connected pedal. This can be used to find a suitable setting

for a pedal this isn't directly supported.

Range: Roland EV-5, (default) , Roland EV-7, Yamaha FC-7, Korg

(EXP-2 & XVP-10), Fatar (& Studiologic VP/25)

Control Pedal Gain

This setting allows you to add some gain to the output of the pedal.

This can be used if an attached pedal does not reach the maximum

level or setting.

Range: 1 - 10

Control Pedal Func

This setting determines the functionality of a pedal that is attached to

the Control Pedal input. The three settings are: Ctrl (use this to use

the pedal with the Morph functionality), Ctrl + Swell (combines Morph

control and Organ Swell) and Ctrl + Volume (combines Morph control

and the main volume of the Stage 2 EX).

Range: Ctrl (Default), Ctrl + Swell, Ctrl + Volume

Swell Pedal Type

This setting configure the Swell Pedal. See "Ctrl Pedal Type" above for

details.

Range: Roland EV-5, (default) , Roland EV-7, Yamaha FC-7, Korg

(EXP-2 & XVP-10), Fatar (& Studiologic VP/25)

Swell Pedal Gain

This setting allows you to add some gain to the output of the pedal.

This can be used if an attached pedal does not reach the maximum

level or setting.

Range: 1 - 10

Swell Pedal Func

This setting configure the Swell Pedal destination. Set this to Swell if

you want this pedal to act as a Swell pedal for the organ, or to Volume

if it should control the volume of all the Stage 2 EX instruments.

Range: Swell (Default), Volume

Memory Protection

This is set to "On" when Nord Stage 2 EX leaves the factory, meaning

that you cannot save any changes to Programs or Synth Sounds. Set

this to Off if you wish to store your own Programs. Menu settings and

the five Live buffers are not protected by this setting.

Range: On (default), Off

Sound Menu

Hold Shift and press Program 2/Sound to access the Sound menu

settings. Use the Page 3 and 4 buttons to navigate between the vari-

ous menu items on the Sound menu. The Value Dial is used to change

settings. When you are done, press Exit (Shift) to exit the menu.

Organ Key Click Level B3

This sets the level of the Key Click for the B3 organ model.

Range: Low, Normal (default) High

Organ Tonewheel Mode

Sets the level of tonewheel crosstalk and cable leakage artifacts of the

B3 organ model.

Range: Clean, Vintage1 (default), Vintage2

Piano Pedal Noise Level

Sets the level of the Pedal Noise that can be turned on for selected

pianos, if a Nord Triple Pedal is connected to the Stage 2 EX.

Range: +/- 6 dB (0 dB default)

Piano String Res Level

Sets the level of the String Resonance feature that can be turned on for

selected pianos (acoustic Med, Lrg and XL sizes).

Range: +/- 6 dB (0 dB default)

Synth Vibrato Rate

This determines the rate of the Synth Vibrato.

Range: 4.00 - 8.00 Hz (Default 6.00 Hz)

Synth Dly Vibrato Amount

This determines the amount of Synth Vibrato when any of the vibrato

delay modes are used.

Range: 0-50 cent (Default value is 25 cent)