Starting Up Applications; Adjusting The Screen Size; Smartphones Only); Correcting The Touch Position On Screen (Android Smartphones Only) - Clarion nx504e Owner's Manual

Starting up applications

Notice
• The unit sometimes does not support
smartphone multi-touch or flicking
functions.
• Applications cannot be added or deleted
from the unit. Execute addition or deletion
of applications on the smartphone.
• During Smartphone linking, do not set
the smartphone to a sleep state. Doing
so might prevent the smartphone from
functioning properly.
MEMO:
• When Smart Access is used for the first
time, the Terms of Use confirmation
screen is displayed. Check the terms of
use, and touch Check .
• "!" will be displayed when there is a
new version of Smart Access available.
To update Smart Access, remove the
smartphone from the unit, and execute
the update by operating the application on
the smartphone.
1
MENU Smart Access
Start up Smart Access. The list of
linking-related applications installed
on the smartphone is displayed.
When an application is started up
on the smartphone, the screen is
switched to the application screen.
2
Select the application you want
to start up.
The application starts up. The
application can be operated from
screens on the unit as if you are
operating the smartphone.
Touch MENU Smart Access to
return to the application list screen.

Adjusting the screen size

(Android smartphones only)
During Smartphone linking, the left and
right, or top and bottom of the screen
sometimes displays black because of
different resolutions on the unit and the
smartphone. The screen size can be
corrected by the following procedure.
Notice
• If you cannot touch , update Smart
Access on the smartphone.
1
During Smartphone
Smart Access
linking .
The side menu is displayed.
2
:
The screen returns to the
application list screen.
:
The screen returns to the previous
screen when the screen is not
displayed the application list
screen.
:
This hides the side menu.
3
Adjust the screen size.
:
This reduces the height of screen
size.
:
This increases the height of screen
size.
:
This reduces the width of screen
size.
:
This increases the width of screen
size.
Reset to Factory Setting:
This resets the screen size after
correction to their factory settings.
Back:
This cancels the settings and
displays the application list screen.
4
OK
5
Check
After adjusting the screen size, go
on to correct the touch position on
screen.
Correcting the touch
position on screen (Android

smartphones only)

During Smartphone linking, the positions
of keys displayed on the unit is sometimes
deviate from the actual touch position
because of different resolutions on the unit
and the smartphone. This deviation can be
automatically corrected by the following
procedure.
1
During Smartphone
Smart Access
linking .
The side menu is displayed.
2
3
Yes
No:
This cancels correction of the
touch position.
Reset to Factory Setting:
This resets the touch positions after
correction to their factory settings.
4
Touch the + mark at the top left
of the screen.
5
Touch the + mark at the bottom
right of the screen.
This completes correction of the
touch position.

Ending Smartphone linking

1
MENU
2
Disconnect CCA-750 or HDMI
cable.
NX504E/FX504E 33