Connecting External Devices; External Devices; Watching Video From External Devices; Setting External Device Listening - Clarion nx504e Owner's Manual

Notice
• For your safety, this system has a safety
function which turns off the picture when
the car is moving, so only the audio
can be heard. The picture can only be
watched when the car is stopped and the
parking brake is applied.

Connecting external devices

<Connection example> When using AUX1
✽ The illustrations for the main unit are of the NX504E.
(Example: For audio)
3.5 mm AV mini plug cable
(commercially available product)
Commercially available
portable device
<Connection example> When using AUX2
✽ The illustrations for the main unit are of the NX504E.
VTR Audio jack AUDIO IN
cable
Video jack VIDEO IN
Commercially available
portable device
26 NX504E/FX504E
MEMO:
• Also refer to the User's Manual for the
connected external device.
• External input connector jack
- A 3.5 mm dia. stereo mini plug can
be connected. Thoroughly read the
User's Manual for the audio cable
(without resistor) and the device to be
connected.
- Use the battery, etc. provided with the
device as the power supply for that
device. Using an external device while
it is being charged by the accessory
socket on the vehicle sometimes causes
noise.
• The screen momentarily turns black when
switching between the audio and video
modes. However, this is not a malfunction.
Listening to audio from

external devices

1
MENU AUX1 or AUX2
2
Touch the screen Audio
3
Operate the external device.
Audio is played.
Watching video from external
devices
1
MENU
AUX1 or AUX2
2
Video
3
Operate the external device.
Video and audio are played.
MEMO:
• While an iPhone is connected with
Smartphone Linking, the smartphone
application screen is displayed though it
cannot be operated by touch operations.
When using Smartphone linking, see
"Using Smart Access."  P.31

Setting external device listening

❏ Compensating for volume
differences
Compensate for volume difference that
occurs depending on the type of connected
external device.
1
MENU
2
AUX1 AUX2
or
3
Touch the screen
4
[Audio Level] settings key
(default: Mid)
5
Select the audio level.
6
Close
7
Back
The level is adjusted to the adjusted
volume.
❏ Adjusting image quality
Preparations
● Before adjusting the display, select
night or day with Day/Night Mode on the
Settings menu.  P.41
1
MENU
2
AUX1 or AUX2
3
Touch the screen
4
Setup at [Display Adjustment]
5
or of item to adjust
Adjust the image quality while viewing
the video image on screen.
6
Back
This sets the newly adjusted image
setting. Image quality adjustments
can be set for both the day and night
screens.
❏ Switching the screen size
Notice
• When the screen size is switched, the
image sometimes appears different from
the original video image.
1
MENU
2
AUX1 AUX2
or
3
Touch the screen
4
[Display Mode] settings key
(default: Full)